Don’t forget to turn off your tub first so that the pumps aren’t active when you’re draining the water. Attach a garden hose to the hot tub’s bottom drain spout.
This will allow you to hook a standard water hose to it and allow the drainage to go somewhere safe and.
How to drain a hot tub with a hose. This will be able to drain out the water. A submersible pump can be used to quickly and easily drain your hot tub. The drain in the hot tub drains away from the water when you empty it.
Run the hose’s open end to the draining place. Drop the hose into the tab, make sure it lands in the bottom, and then turn it on. Crimp the hose if the faucet is higher than the hot tub and take the end of the hose to the lowest place in your yard, allowing the water to pour by gravity from the hose.
Place the pump at the deepest point of your hot tub. Draining your hot tub using a garden hose, remove the front panel on your hot tub to find the hose spigot. A lot of water will be draining from your tub so stretch the hose to a part of the yard where the water drainage won’t matter or where it won't flood.
Step 3 go back to the hot tub and make sure the hose stays at the bottom of the tub as the water level drops. Turn off the hose, disconnect it from the faucet, and keep it low to the ground. With one, you can drain up to 2,000 gallons of water per hour.
Keep it low on the ground, making sure it’s lower than the tab, and allow gravity to work its. Personally, i like using the aquapro apc3000 submersible pump.this 1/3 hp pump can be used with a ¾” garden hose or a 1¾“ sump pump discharge hose to remove up to 30 gallons per minute (1,800 gallons per hour). If the drain or sewer is situated farther away, attach a garden hose to the spigot, position the other end of the hose over the drain, and open the valve.
To drain the water with a sump pump, follow the steps: Turn it off and plug out from the faucet. When the hot tub is empty, turn the sump pump off and detach the hose.
Next, you must let the water run through the hose into the hot tub until there is no air inside the hose and only water is coming out. These are usually on the same side as all the controls. Attach the hose, open the spigot and let the water drain.
You can often find the controls in the cabinet. First of all, you must attach one end of the hose to a water bib (faucet). If your hot tub has an attached hose this can be used to drain the tub from the bottom.
Find a safe spot to position the hose to drain such as your driveway to flow into the street. Keep it on until there is no more air escaping into the tab. The quickest way to drain a hot tub is with a submersible sump pump.
When the hot tub is empty, turn off the pump, remove it from the spa, detach the hose, and return it to storage. It is essential that only water must be coming out by the time you finish. Almost all hot tub, and especially the hot tubs that we sell have a built in drainage valve.
Place the end of a garden hose in the hot tub, dropping it straight down into the water so that it lies on the bottom. Attach a garden hose to the sump pump. The fastest way to drain a hot tub is to use a submersible pump.
You’ll need to twist the hose onto the spigot so make sure it’s on firmly. Different ways to drain a hot tub. Once the water is drained, you can easily inspect and wash the shell’s interior, and remove and clean your spa filters before refilling it.
The idea here is to fill the hose with water completely, with minimal air bubbles in the line. The other end of the hose must be kept inside the hot tub. Turn the sump pump on and start draining.
Attach the hose, open the spigot and let the water drain. Put the open end into the hot tub, and start filling the hot tub. You can drain these types of tubs by attaching a regular garden hose.
Some hot tub manufacturers will have a water hose connection inside the cabinet. There are a couple of ways you can drain a hot tub. To drain your hot tub with a hose, follow the following steps:
If left on your lawn, it will become flooded. Connect the hose to the water bib (that's the faucet on the side of your house). Now it’s time to drain the water out of the hot tub.
Doing this creates a siphon that will pull the water out of the hot tub and through the hose. Note that if your drain or sewer is positioned uphill of your hot tub, you’ll need a submersible pump to drain the tub completely. If left on your lawn, it will become flooded.
The first option is to simply open this. Simply, drop the pump into the tub, flick on its switch and wait as the water flows out. How to drain a hot tub with a hose.
Turn the pump on and let the spa drain. Find a safe spot to position the hose to drain such as your driveway to flow into the street. Once you've got flow into the tub, turn off the water at the hose bibb.
Draining your hot tub using a garden hose, remove the front panel on your hot tub to find the hose spigot.